21 April 2013

Jeans #9 (Part 7 - belt loops)

Hmm...no intro here.  Let's just get to it. =)

Belt Loops (29 minutes)
1.  The belt loops raveled something awful the first time around, so now I always finish the edges.
2.  Fold one long edge to the inside and press.  Fold the remaining long edge on top of the first and press.

3.  Using the blindhem foot, topstitch each long edge.


4.  Cut each 12-inch strip into three 4-inch pieces.  Pin each belt loop to the jeans front & back, right sides together.  I use the recommended placements provided by the instructions.  At each place, I make sure that the folded edge of the belt loop faces outward.


The instructions say to stitch 3/8" from the edge and then again at 3/4" from the edge. I think 3/4" is too big, so I use 5/8" instead.

I've attached the waistband and need to topstitch it in place.  I have to take a small break from the jeans for a moment to do some end-of-semester stuff and make another quick project.  I'll share the details about that soon.  I'd like to wear my jeans on Friday and have the quick project sewn before Wednesday.  

Until next time, peace!

L








20 April 2013

Jeans #9 (Part 6 - in/out seams)

I must be set on slow-mode or something.  Once again, another sewing process has taken me longer than normal to complete.  Honestly, how much time should it really take to sew four seams?  Apparently adding an hour to the most conservative estimate should suffice.  Yikes.

Okay, okay.  Perhaps I'm being a little harsh.  After all, I ceased sewing to try on the pants for fit.  I also played around with the settings for the serpentine stitch to get the curve I wanted.  But should this really have taken an hour?  

In/out seams (80 minutes)

1.  Since the front and back crotch seams are already sewn, the inseams can be sewn in one complete line from hem to hem.


2.  The jeans are topstitched the same manner.  


3.  Once the inseams are topstitched, pin and sew the outseams.  Press the side seams toward the back and topstitch to just below the front pocket.  Since I can't see the front pocket, I use the back pocket as my guide.  I think this line helps to add security to what can be a high-stress area.  I don't know if this is true or not, though.  Some RTW jeans have a straight line of topstitching while others have interesting designs.  I opted to end the straight stitch with a serpentine stitch.  On my last pair, I added a small lightning bolt to mimic the design on the back.


I've attached the belt loops and will post that part next.

L

LinkWithin

Related Posts Plugin for WordPress, Blogger...