04 February 2018

Burda Style Skirt (11-2017) & Top (12-2017)

top:  12-2017-111
skirt:  11-2017-106

I love a good Burda skirt, so when I saw 106 in the November issue I knew I was going to make it.  When I saw Dressmaking Debacles' review, I paused other sewing projects and began working on it.

 (Ugh...the copyright year!  Ironically, googling how to change it has not been fruitful).

Look at that front!  Angled and topstitched seams?  Yes, please!

The fabric is wool tweed from the stash which pressed and sewed beautifully - like all wool tweeds. 

I traced a size 44, but ended up taking 3/4"+ seam allowances on both sides.  I am still working out my Burda size and think either a 44 with larger seam allowances is the way to go.  I made Burda 6635 in a 42 and it's snug - not terribly uncomfortable - but snug enough to skip dessert and maybe some of lunch.

I did a 1" full seat adjustment for the trunk junk and removed 2" in length.  I did not add a hem allowance.


Although it's hard to see, each of the front diagonal seams are topstitched.  I didn't want the skirt to look too sporty, so I used thread that would blend in.


The skirt is lined and faced at the waist with petersham.  The pattern doesn't come with lining pieces.  Since there was no way I was cutting all those front pieces again - out of slippery lining fabric, mind you - I just traced around the already-assembled front to make a pattern.  Boom. 

It's funny how I love all the seams until I'm ready to sew them.  Hah!

I love this skirt; I wore it for a solid 24 hours (loooong story) and it held up.  Incidentally, I think I need to find a new, new dry cleaner.  This is the third garment I've gotten back from them where the pressing looks like shit.  Moving on...

This top is not something I would have made had I not seen it on someone else.

The line drawing does nothing for me and I can't even remember how it looked on the model.  It's that uninspiring.

But then I saw Lilly's version (on Instagram) and tsedai's pattern review and was all in.

I cut size 42 in the neck and armhole and size 44 on the sides.  I did not make an FBA or add a hem allowance.  

The top is VERY boxy and not in a good way.  (Is there every a way boxy is good?)


When I tried it on, I was so disappointed.  The top was huge and unsightly.  Determined to not be defeated, I took out the pattern for a raglan top that I made a few times, Simplicity 1945, and laid it on top.  Look at all that extra width!  And remember, the Simplicity top has seam allowances!  

I trimmed the side seams of the front and back to the Simplicity top plus a seam allowance.  Although the Simplicity top fits well, I wanted a little more room for this top.  I also rounded out the hem.


Sewing the sleeve ruffle was not easy because the seam joining the upper and lower sleeve is extremely curved.  


That curve is no joke and has to be sewn carefully.  Plus, you have to baste the ruffle to the upper sleeve wrong side to right side, upside down, and try to keep the ruffle out of the way when stitching.  Not thinking ahead, I made the mistake of using 5/8" seam allowances when 3/8" would have given better control.  I had to pick stitches in a few places because of puckers.


Love, love, LOVE the shoulder area on the back.  Is there something magical about the Burda raglan sleeve??


I left all of the ruffle edges raw.  The fabric is a lightweight merino wool knit (from the stash) and a rolled hem was too heavy.

I sewed the seams on my sewing machine first, then finished together on my serger.

Both the skirt and top are new favorites that I am sure will get lots of wear.

Up next:  I'm working on my BAM (Burda-a-Month) pattern for January.  Well, actually I'm working on three Burda patterns. o_O  I really need to get a handle on the effects of Ooooo...shiny!

Maybe I'll start working on that 2017 Year in Review post.  Maybe.

Until next time, peace!

16 January 2018

Pattern Review: Burda 6635 (First Completed Garment of 2018)

Don't check your vision; this is not an illusion. Yes, this is a new a blog post after...what...five or six months of silence?  Well...see...what had happened was...2017 was all over the place and blogging (and sometimes sewing) wasn't a priority.  I don't know if I will be able to keep at it this year, but I will try.  On with review...



When JoAnn Fabrics has its $2.49 sale on Burda patterns, I tend to look at patterns I would not normally sew.  Enter 6635.  I liked all the seaming on the front and back and thought, "why not?"  

I've had this pattern in my stash for a while and kept moving in and out of the sewing queue.  I made every excuse to NOT sew it:  it has too many seams (bwahahahhahaha); this is a lot of skirt for my five-foot frame; I don't understand how to sew that pointy corner-curved seam area. 

After getting a headcase about this silly pattern, I just did it.  It's only fabric, right?

I used 2 yards of a lightweight gray denim from Fabric Mart and sewed a straight size 42 and shortened each panel two inches (more on this in a bit).  I wanted to use the fabric for another denim jacket (Kwik Sew 2895), but the fabric is a skosh too light.  I still have 2 yards left; maybe I'll try the jacket anyway.

(right front)

 
 (left front)

So about that pointy corner-curved area.  This. Was. A. Beast. to sew.  The left front was stitched, picked, and stitched SO many times that I had to fuse some interfacing to keep the fabric from shredding any further.  I was able to get the right front on the first try, but it's still not great.  I gave up after the sixth or seventh try on the left front and the picture definitely shows it.  There is a small pucker that will just have to stay there.  I steamed the ish out of it but apparently fabric has a good memory.  Shrug.  I'm over it. 



I used muted gold topstitching thread for the seams and buttonholes.  Gray and gold interestingly play nicely together.  At first I was indecisive about the buttons.  Nothing I picked really "went" with the skirt and the buttons I had were too small.  

I like these buttons the best, but they're metal and a bit heavy.  The front band is interfaced so there's no concern about the buttons not being supported.  I'm more worried about the weight of eight metal buttons dragging down the front.  When I wear the skirt, I'll report back with more info.

Earlier I mentioned sewing size 42.  In an effort to get better at sizing and pattern adjustments, I am trying to stick with sewing one pattern company for an extended period of time.  Since I've had some success with Burda skirts and shirts, I decided to start with them.  

I made a magazine skirt pattern last month and found that the size 44 was too big.  The 42 is juuuuuust a little snug.  So I think if I start with a 42 and take 3/8 seam allowances, skirts will fit just fine.

Burda's draft is rumored to be more curvy-friendly so this adventure has me motivated.  So far I made two button-front shirts that I wear regularly.  We'll see how this goes. =)

***

I hope to write a review on a couple of patterns I made from the November and December 2017 issues of Burda Style as well as a (very late) 2017 sewing year in review.

L


















LinkWithin

Related Posts Plugin for WordPress, Blogger...