Another New Look 6407

This makes four this year!

At the end of August, I started sewing a black version of this pattern to go with my Starting from Scratch wardrobe.  Then I saw the rules for the PR Sewing Bee.  Sew a fitted blouse?  For real?  

Not only did I already have the pattern pieces out, the fabric was pre-washed last year.  Score!  

The first change I made was to raise the neckline one inch.  This top is quite low-cut and puts the girls on full display.  Unless I'm wearing a jacket, I have to wear a camisole with it.  Raising the neckline solved this problem.

The first three versions all have cap sleeves and I wanted long sleeves.  I made a one-half inch bicep adjustment and did not make a muslin.  Nope.  Nada.  I just went for it.

I used Pro-WOVEN Shirt Crisp interfacing from Fashion Sewing Supply.  This stuff is expensive compared to Pellon, but it is fantastic for giving nice structured collars and cuffs.

Speaking of cuffs...these joints were a pain to put together.  The opening was a fraction too small for my machine's free arm, so I had to sew very slowly and carefully.  Topstitching took some maneuvering, but eventually it worked out.

The shirt looks okay without a belt, but I'll probably wear one anyway.  Here I've paired it with a dark brown linen skirt, animal print belt, and scarf.  Good dark colors for fall.

Even though I love this pattern and have another one in the mix, I wish it had a separate front band instead of a facing.  I'm going to try and use the pattern pieces from this pattern to adjust those of Butterick 5678.

That's all for now.  Until next time, peace!

L

Converting Big Honkin' Darts Into Shoulder Princess Seams (long & pic heavy post)

Anyone of ample boob size who's had to make an FBA dreads the inevitable BIG HONKIN' DART (haha thanks Debbie) that results; well, at least I do.  I make anywhere between a 1 and 2" FBA just to get the centers front almost close.  The result of this adjustment is usually a large dart that is next to impossible to sew or keep neat.  I got so frustrated with the BHD that I stopped buying patterns that had darted fronts. 

Having had recent success with fitting shoulder princess seams and converting back bodice darts to princess seams, I decided to attempt to do the same with the front.

I'm going to describe how I got New Look 6407 to fit reasonably well by doing an FBA, tackling the big honkin' dart, and changing the front and back to have shoulder princess seams.

The pictures below are my second attempt at the process and are not the pattern pieces I used to construct the actual shirt.  I was so engrossed in the process the first time around, I neglected to take any pictures!  Oops.  I'll explain the differences between the two versions as I go along.

One caveat:  I am by no means an expert.  I did what I thought made sense.  I tried searching the interwebs for guidance, but I am terrible at doing that.

FBA then conversion to princess seams
I couldn't find any information on which to do first, so I tried it both ways.

1.  I started with a traced version of the pattern.  I only had one copy and wanted to preserve the original in case I messed up.  Before you start to do anything, copy the grainline somewhere in the area that will eventually become the side front.  I always forget to do this and have to backtrack to figure out where the grain is.

2.  The horizontal bust dart looked a little high, so I redrew it to point closer to the vertical waist dart.

 

3.  Next I used the slash-n-spread method to make a 2" FBA.  In the first version, I only made a 1.25" FBA because I thought I would have enough room based on the finished garment measurements.  I ended up having to add 1" seam allowances at the bust area

Notice to keep an even width down the front, a super large dart is needed.  My dart measured 4.5" (11.4 cm) at the widest point.

4.  To re-establish the vertical dart, I kept the right dart leg and copied the left leg from the original pattern.

I don't know if this is right or not, but I realize that redrawing the dart like this takes away some of the additional width that's added by the FBA.  The additional is taken away at and below bust level. I'd have to think about it more should I attempt to do this again.

5.  To find the shoulder princess line, I measured the width of the shoulder, minus seam allowances and divided the result in half.

 

6.  Next I drew a straight line from the middle mark to the top of the vertical dart.  Then I used a curved ruler to soften this line so that the seam curves gently over the upper chest.

7.  Before doing any cutting, make hash marks for notches above and below the bust curve.  Again, this is something I forget to do until after the fact.  I end up having to "walk the seam" to find decent match points.  Things are much easier if you identify these points now!

I cut along the curved line, stopping at the top of the vertical dart.  Then I cut the bottom leg of the horizontal dart also stopping at the top of the vertical dart.  Doing this turns the top of the vertical dart into a pivot point.

8.  Next, I closed and taped the horizontal dart.  This created a shoulder dart and the shoulder princess seamline.

 9.  To separate the panels, I continued cutting along the vertical dart.

Notice that the side front panel has an unsightly point at the bust.  I used a curved ruler to round the area.

Here are the side front and front pattern pieces:

I marked "Add SA" everywhere along these seams as a reminder to...um...add seam allowances. =)

In Threads #170, Connie Crawford suggests adding 1/2" of ease at bust level on the side front panel only.  I didn't do that on my first version, but did so on the second version.  I haven't sewn a muslin of the second attempt, so I don't know if this extra ease is needed. 

Below is a picture of the first and second versions.  Doing a 2" FBA as opposed to a 1.25" FBA appeared to not create that much more bust space.  I find that very odd.

(first attempt on top)

Notice how angled the armhole is on the second version.  Hmm.

Using the pattern pieces from the first attempt, 1" seam allowances at the bust, and 1/2" seam allowances everywhere else, here's how the blouse fits:

 

These are pictures of my for-real fabric.  I liked the muslin enough to proceed with cutting out my fashion fabric.  Not too bad, eh? I could probably use some more tweaking somewhere.

Princess seam conversion then FBA

Doing it this way was less successful, in my opinion.  The resulting armhole on the side front panel was so skewed it looked almost alien-like. 

The process is pretty much the same:

• find the shoulder princess mark on the shoulder 
• draw the princess seam line from this mark to the top of the vertical dart
• cut along this line and along one of the horizontal dart legs
• close the horizontal dart
• separate the panels by cutting along the vertical dart

Pictures:

I made a 2" FBA again using the slash-n-spread method:

For comparison, the first attempt (FBA then conversion) is on top of the third attempt (conversion then FBA).  As you can see, I definitely have enough room at bust level, however look at the angle of the armhole - that just does not look right. Additionally, the front panel is much longer than on the first two attempts. 

 

Conclusion

I think doing the FBA first and then converting the result to princess seams is the way to go.  Even though I had to add an extra wide seam allowance, I was able to get the top to fit reasonably well.  As such, I am a bit more motivated to try darted fronts now knowing that I can make this conversion.  I'm not going to go searching for darted fronts because working with already-established shoulder princess seams is so much easier.  However, if I find a design that I like, I am not afraid to tackle it.

I hope this was helpful!  If you have any questions, feel free to ask in the comments.

Up next:  I need to finish the blouse!  My iron started smoking and going crazy yesterday, so sewing is stalled until I get another one and/or setup my gravity feed iron.  Did I mention I bought a gravity feed iron? =)

L