13 March 2022

The moment I said...

“…let me do these buttonholes real quick…”
 
I should have stopped. 
 
 
DEEP SIGH
 
I should know by now, after almost 20 years of sewing, that I should not sew anything “real quick.” Those two words are a recipe for a five-course meal of disaster. Ugh.
 
Let’s talk about this jacket. I was SO close to finishing. All I had left to do was hem the sleeves and add buttonholes/buttons. It was getting late and I wanted to do a bit of sewing before I retired for the night. 
 
Enter:  “Let me do these buttonholes real quick.”
 
The first buttonhole went mostly okay. My machine didn’t like the thickness, but it managed. The second buttonhole did not want to cooperate. It was too far from the edge and I had to stitch it twice. Even with stabilizer, my machine pitched a fit. 

I picked the stitches - thankfully the thread blends really well with the fabric because you can’t see the disaster that is the first two attempts. I stitched it a third time and let it go. Wasn’t going in for a fourth try. 
 
After I was satisfied with both buttonholes, I opened them with my chisel and…stared at the jacket.


SIIIIIIGGGGGHHHH.
 
I put the f*****g buttonholes on the wrong damn side. 
 
Listen. LISTEN. I was crushed when I realized what happened. The jacket was looking so good on the dress form. I had all these ideas for shirts and skirts to pair with it. Now it’s ruined. 
 
Okay, maybe I’m being dramatic. It’s not ruined, but it’s not what I want. Womenswear buttons right over left and that’s what I’m used to. Sure I can wear this, but I’m not going to be happy with it. 
 
And you know what? I had it pinned right over left on my dress form THE WHOLE TIME. 
 
See? "Real quick" always chooses violence.

And and and, even though I used smaller seam allowances, the jacket is still too small. It’s not going to button anyway. 
 
So off to Area 51 it goes. I’ll keep this for a few months and see if I like it later. Maybe I can try to save it by darning the buttonholes closed and sewing buttons on top. Or something. If not, off to the earthmound it goes. Or maybe a thrift store - if someone will take it. 
 
No more woven clothes for a while; I'll stick to knits for a bit.
 
And handbags. Rectangles and circles don’t need to be fit nor do they need buttonholes. 

L

27 February 2022

Simplicity 2810 (jacket) & February Wrap Up

I first attempted this pattern in 2017 and was pretty stoked at my first woven welt pocket application.
 

Unfortunately, the jacket got sent to Area 51 on indefinite time out because of the collar/facing situation. There was so much bulk and twisty foolishness that I could not get this area to work or look anything close to right. Rather than tossing it, I kept it with the hope of returning to it later and trying again.
 
Well, later is here. 😁 I still have some work to do, but it's almost done. I need to hem the bottom/sleeves, hand-stitch the lining to the hem, add buttonholes/buttons.
 
  
Fabric & Notions:
  • 2 yards of wool tweed
  • 90/14 needle for shell; 70/10 microtex needle for lining
  • fusible weft interfacing (collars, facing, all hems)
  • scrap cotton for back stay
  • 11" x 3" bias-cut fleece for sleeve heads
  • cotton basting thread to temporarily secure the welt pockets
  • dye-able buttons from the 1960s 😮 (my favorite part of this jacket!)
 
Size:  I cut size 16 in 2017; the first version is a tad small. I used the same pattern pieces, but sewed with smaller seam allowances. I tried it on throughout construction and the jacket is still a bit small. Ah well.
 
Construction:  I sewed almost all of the jacket on my Juki semi-industrial straight stitch machine. Let me tell you:  I never knew I wanted a straight-stitch machine until I had one! I am considering buying a full industrial machine because domestic machines just don't have the same piercing power. I'll still keep my other machine for specialty stitches (zigzag, blind, buttonholes, etc.), but I foresee Juki getting all the attention.

Back to the jacket...

I'll blind hem the jacket on my Babylock and sew the other hems by hand. All jacket edges were finished on the serger. Lining seams were stitched on the sewing machine and finished together on the serger as well.

Light Tailoring:  With all jackets and coats, I usually add a back stay for structure and fuse 2" strips of interfacing to the hems. Instead of sewing gathering stitches along the sleeve cap, I use bias-cut fleece. This serves two purposes:  (1) the bias cut gathers the sleeve cap automatically and (2), the fleece provides cap support and aids in shaping this area.


To reduce bulk in the collar/facing, I cut the interfacing without seam allowances before fusing. I think this helped to not make sewing this part a PITA like it was the first time.
 
 
 
I messed up one side of the collar (pictured above). Because I used a thread that blended TOO well with the fabric, I couldn't see the stitching line when it came to notching the curves. So of course I cut right through the stitching and only noticed it when I turned the collar right side out. There were three nice little holes looking back at me. I had to take a bigger seam allowance here to try and cover the holes. Meh. The fix isn't too visible, but I can tell the difference.

Dye-able buttons: Last year at one of many trips to my happy place, I found a button coloring kit from 1969.
 

Two kits cost maybe $0.50, so I bought them thinking they wouldn't go to waste if dyeing didn't work; I'd find a use for the buttons for sure. Besides, how much expectation can I have from a kit that was over 50 years old?
 
Well you know what? It worked!!

original color on top
dyed color on bottom

I picked the color on the card that came as close to the jacket fabric as possible (blue pencil points to the chosen color). It's kind of hard to see in this image, but the color on the card is in the peach family - just a little lighter.
 
 
Dyeing the buttons was quick and easy. On the back of the package is a series of color strips:   red, blue, and yellow. Based on the color choice from the front, sets of strips corresponding to that color are cut and boiled in 4 ounces (1/2 cup) of water for 10 minutes. The color I selected required 8 blue, 16 yellow, and 10 red strips.
 
 
Once 10 minutes have elapsed, the strips are removed and buttons are boiled in the tinted water for the time listed next to the color. My color required an additional 6 minutes. Lighter and darker shades require less and more boiling time, respectively.
 
 
The match is spot on!! The buttons are 1" and will be perfect for the front. They might be too big for the sleeve, so I'll have to decide what to do there.
 
 
I don't know if button color kits still exist, but if they do, I'm a believer. Hah!
 
***
 
February Wrap Up:
 
I am on track to finishing the second of two garments for this month. Life is still stressful and despite February having 84 days, I only managed to (nearly) complete two garments:
  • another Simplicity 9385 in purple Merino wool
  • this jacket
For March, I hope to make another Boronia Bowler (gift for a friend) and maybe start working on garments from my Make Nine. I'm trying to resist the urge to start something new before finishing this jacket. I am sooooo close!
 
L



 




LinkWithin

Related Posts Plugin for WordPress, Blogger...