25 August 2024

Finished: Burda 7827 (dress)

After multiple attempts at trying to make Simplicity 8014, I needed a sewing win. I did not want to give up on shirtdresses entirely and searched my pattern stash for alternatives. The first of two that I recently completed is Burda 7827.


The style of this dress isn't the same as Simplicity 8014, but it has details that I like (epaulettes, front flap, separate front band, topstitching) and princess seams to adjust fit.

 
I made view A without the epaulettes and chest pocket. I did not exactly include the belt tabs; more on that later.

Pattern Highlights:
  • front and back armscye princess seams
  • two-piece raglan sleeves 
  • front in-seam pockets with flap
  • separate front band
  • collar stand and collar 
  • right front chest flap
  • belt tabs & belt
Fabric & Notions:
  • 3 yards stretch cotton sateen (Mood)
  • 11 x 1/2" buttons (Wawak)
  • shirt crisp light fusible interfacing (Fashion Sewing Supply)
  • 1.5" black leather belt buckle (Wawak) 
  • 80/12 universal needle
  • regular sewing and serger thread
  • scraps of tear-away stabilizer for sewing buttonholes
 
Sizing & Alterations:  Because I love the fit of my TNT button-front shirt pattern, I used its bodice measurements to determine the size to cut for the dress. I took flat pattern measurements of the shirt pattern and of dress size 44 at the fullest part of the bodice front and back pattern pieces. 
 
 
 
Since the measurements were very close, I felt comfortable cutting right into the fabric without making a muslin.

The pattern pieces looked a little long and I waffled back and forth on whether I should shorten them. Ultimately, I decided not to shorten. Instead, I lopped 1" from the bottom and sewed a 2" hem. When I make this again, I will shorten it appropriately.

General Construction Notes:  Nothing new here. Sewing was very straightforward and the instructions were not complicated. I sewed all the seams on my machine, serged the raw edges together, pressed to one side, and added a single line of topstitching.

I used Shirt Crisp (light) fusible interfacing from Fashion Sewing Supply. I cannot recommend this interfacing enough for its reliability and structure. It's expensive, but very well worth it.
 
 
To sew the collar / collar-stand unit, I always use Kathy Brenne's "Build a Better Stand" tutorial. Her method makes the most sense to me and produces consistent results every time. I also take time to carefully mark all of the stitching lines and hand-baste the stand before topstitching. Even though this takes a bit more time and effort, I am rarely disappointed with the finish. On a future shirt project, I'll carefully document and share the process here.
 
I struggled making the belt tabs. The tabs are like Norman windows:  a rectangle surmounted by a semicircle. Even after careful marking, stitching and clipping, I couldn't quite get the semicircular ends to be uniform. So I used plain old rectangles with the same dimensions.



In the end, I removed the belt loops because they were seated far too high on my waist. I might reattach them later, though I can still wear the dress without them.

Buttons are a mottled brown from Wawak. I was going to use black buttons, but I like the color variation in these much better.


The fabric is stretch cotton sateen (SCS) from Mood. Y'all. Mood and their stretch cotton sateens have a choke-hold on my wallet. The weight is hefty enough to not need a lining, but fluid enough to have decent drape; they're great for dresses and button-front shirts. I've made six garments already this year from this type of fabric and just cut out a seventh!

Conclusion:  I think this is a great pattern and I intend to make at least one or two more versions. The pattern envelope shows a color-blocked version (solid front/back bodice, different color for band, collar, epaulettes, pocket flaps). I'm intrigued by this and might give it a go.

Dude Review:  "Looks good." The man is not a talker of fashion. 😁

I'm still on the hunt for a pattern similar to Simplicity 8014. The next dress I made is kind of close, but still lacks the skirt flare that I want. I'll review that one soon.

L


17 July 2024

Simplicity 8014: It's been real.

I tried, y'all. I really did. I don't give up easily, though I do know when I've had enough. The time has come for me and Simplicity 8014 to part ways. 
 
 
I've tried to make it work several times using views D and B. It's weird because I usually have success with Simplicity patterns. Years ago, I took time to figure out my pattern size and necessary adjustments so I can cut right into the fabric without making a muslin. That was not the case with 8014.

First Attempts:  View D


I tried to make this view first. I cut size 16 and made a 1" FBA - which resulted in a huge horizontal bust dart. I tried sewing the dart, but it was too large to reconcile and I could never get it to not be pointy. So I re-did the FBA and converted the dart to shoulder princess seams.

 
This felt promising at the time, but it didn't pan out. Despite appearing to have enough room, it was still too small and I hated how it looked.
 

The fabric being a bit stiff probably didn't help. As you can see, I didn't bother putting in buttonholes. Suffice it to say, this went to the donation pile. 
 
That was in 2022. Fast forward to now.
 
Second Attempts:  View B


I have been wanting to make a fit-and-flare style dress for a while. Pattern Review shows multiple pages of versions made by others and I wanted one for myself. So I decided to try 8014 again. Deeeeeeep sigh.

Again I started with a size 16 and made an FBA. 

 

I was overconfident and cut into my fashion fabric only to find that like before, the big honkin' dart was unruly. So I had to get more fabric and re-cut the front. I don't have any pictures of that mess.

I made a second FBA and converted the dart to shoulder princess seams.

I cut into the fashion fabric again and realized that the princess seam was far too close to center front. It wasn't cute, y'all. 

So I did re-did the FBA a THIRD TIME. Told you...I don't give up easily.
 
 
The princess seam placement was much better and the fit was pretty good. 
 
I was finally happy and regained hope that this would be the one. I envisioned making multiple versions of this dress in a wide variety of fabrics.

😞

Then I started sewing. 
 
Issue #1:  order of construction
The instructions have you construct the front and back bodice along with the collar - then attach this to the completed front and back skirt unit. I understand why it's done this way. It's much easier to wrestle with only the bodice when attaching the collar rather than deal with the whole weight of the dress. I don't like doing it this way because it leaves little room for fitting as you sew. I prefer to sew the complete front, complete back, and then sew the side seams.

Ultimately I decided to follow the instructions. Were I to sew something similar to this again, I will go back to doing it my preferred way.

Issue #2:  front and black waist pleats
 
 
All this time, I thought these were vertical darts. The line drawings appear to show pleats, but if you're not looking carefully, they're easy to miss. 

Since I made shoulder princess seams, the front pleats and seam line were too close and it made for awkward sewing. Plus I didn't like how the pleats "poked out" at the waist; it's a weird look.

 
 
 The back pleats were fine - although still creating a bit of fullness.



Issue #3: front waist seam and band
 
 
In both views, the front button band is cut-on. That is, the band is folded twice and stitched down. This is all good if there isn't a seam breaking up the band.  Remember:  the bodice and skirt are constructed separately and then joined at the waist. About three inches of the band on the bodice and skirt are left un-sewn until after the side seams are sewn. Doing it this way, I found it nearly impossible to make the waist line even.


 
In the future, I will make a separate front band that is attached after the bodice and skirt are joined. This way, hopefully any unevenness won't be as noticeable.
 
 
I can hide the wonkiness with the belt. I've yet to wear the dress, so I don't know how well it will hold up.

Final Thoughts
Despite the many attempts and a few problems with construction, I like my dress. The fabric is stretch cotton sateen from Mood and the buttons are vintage from the stash. I'll wear it for sure, but I won't try 8014 again. Some patterns don't work and that's fine. Since making this dress, I've tried two other dress patterns that fit much better with less hassle. I'll share details soon.



Question:  Have you tried this pattern? If so, what was your experience?
 
Thanks for reading!

L

LinkWithin

Related Posts Plugin for WordPress, Blogger...