Showing posts with label dress. Show all posts
Showing posts with label dress. Show all posts

15 September 2024

Finished: Burda 5-2006-119

This is the second of two shirtdress patterns that I tried recently in an effort to recover from the disappointment of Simplicity 8014.

 
 
Although this style of dress isn't the same as Simplicity 8014, it does have some similar features:  front-back yoke with forward shoulder seam and short sleeves with turn-up cuff. Bust shaping on the Simplicity pattern is done through darts and pleats whilst the Burda pattern has front shoulder princess seams and a center back seam. In this pattern, the front band is cut on and there is no waist seam.


 
I made view 119 with the shorter length of view 120 and without any pockets or the front self-fabric strap things.
 
 

Unless you look carefully at the photo, it's not immediately clear that there are separate pieces to cover the princess seam. I certainly didn't realize it until I reviewed the cutting diagram and read the instructions. Small sections are sewn to create the belt loops and in-seam pocket facings...or something (Burda instructions are famously terse). It's a neat design and I think it looks good on the modeled version. I didn't have the patience to put up with what I thought would be annoying to sew, so I didn't include it.

Fabric & Notions:
  • 3 yards of stretch cotton sateen (Mood...y'all I need an intervention.)
  • 9 x 5/8" metal shank buttons 
  • shirt crisp light fusible interfacing (Fashion Sewing Supply)
  • 1.5" gold metal belt buckle (Tandy Leather) 
  • 4 x 4mm gold grommets
  • strip of black vinyl fabric for belt 
  • 80/12 universal needle
  • regular sewing and serger thread
  • scraps of tear-away stabilizer for sewing buttonholes
Sizing & Alterations:  I took flat pattern measurements of size 44 and compared them to my beloved TNT Burda shirt pattern.
 
 
It's an inch bigger across the bust, but that's alright. I cut right into the fabric and sewed 5/8" seam allowances. I didn't add a hem allowance and shortened the length 1 inch. For the hem, I folded and pressed 1 inch twice and topstitched.

General Construction Notes:  The fabric is a lovely stretch cotton sateen from Mood (link). Mood runs sales often, so it helps with the cost. The dark blue is not as dark as in the image, but still a nice rich color.
 
All seams were sewn on my machine, serged together, pressed to one side, and topstitched. I cut two yoke pieces and used the Burrito Method for a clean inside finish.


I wanted to look of the sleeves from Simplicity 8014 so I lengthened this sleeve pattern by 2 inches so that I could sew the folded tuck. I don't have a good photo of the sleeve.



 
My belt is a bit too long and could use another grommet - easy fixes for next time. I need to add belt loops to the dress and/or a loop in which to slide the end of the belt. As it is, it isn't secure.

Conclusion:  This is a good pattern and I can see making many more versions. I have a third pattern with more skirt flare to try next.

Other thoughts:  I wore the Simplicity 8014 dress yesterday and...well...let's just say I got one wear out of it this year. Although I really like how it looked, I didn't like how the waist area fit or constantly having to fiddle with it. 

This dress kicked off a mini nautical-themed wardrobe I am sewing for fall. The colors are white, yellow/gold, blue, and red. So far, I've sewn four total items (dress and three shirts) and have cut out two more shirts. I intend to make a couple of skirts, vest, and some pants to go along with all the tops. More on that soon!

L

17 July 2024

Simplicity 8014: It's been real.

I tried, y'all. I really did. I don't give up easily, though I do know when I've had enough. The time has come for me and Simplicity 8014 to part ways. 
 
 
I've tried to make it work several times using views D and B. It's weird because I usually have success with Simplicity patterns. Years ago, I took time to figure out my pattern size and necessary adjustments so I can cut right into the fabric without making a muslin. That was not the case with 8014.

First Attempts:  View D


I tried to make this view first. I cut size 16 and made a 1" FBA - which resulted in a huge horizontal bust dart. I tried sewing the dart, but it was too large to reconcile and I could never get it to not be pointy. So I re-did the FBA and converted the dart to shoulder princess seams.

 
This felt promising at the time, but it didn't pan out. Despite appearing to have enough room, it was still too small and I hated how it looked.
 

The fabric being a bit stiff probably didn't help. As you can see, I didn't bother putting in buttonholes. Suffice it to say, this went to the donation pile. 
 
That was in 2022. Fast forward to now.
 
Second Attempts:  View B


I have been wanting to make a fit-and-flare style dress for a while. Pattern Review shows multiple pages of versions made by others and I wanted one for myself. So I decided to try 8014 again. Deeeeeeep sigh.

Again I started with a size 16 and made an FBA. 

 

I was overconfident and cut into my fashion fabric only to find that like before, the big honkin' dart was unruly. So I had to get more fabric and re-cut the front. I don't have any pictures of that mess.

I made a second FBA and converted the dart to shoulder princess seams.

I cut into the fashion fabric again and realized that the princess seam was far too close to center front. It wasn't cute, y'all. 

So I did re-did the FBA a THIRD TIME. Told you...I don't give up easily.
 
 
The princess seam placement was much better and the fit was pretty good. 
 
I was finally happy and regained hope that this would be the one. I envisioned making multiple versions of this dress in a wide variety of fabrics.

😞

Then I started sewing. 
 
Issue #1:  order of construction
The instructions have you construct the front and back bodice along with the collar - then attach this to the completed front and back skirt unit. I understand why it's done this way. It's much easier to wrestle with only the bodice when attaching the collar rather than deal with the whole weight of the dress. I don't like doing it this way because it leaves little room for fitting as you sew. I prefer to sew the complete front, complete back, and then sew the side seams.

Ultimately I decided to follow the instructions. Were I to sew something similar to this again, I will go back to doing it my preferred way.

Issue #2:  front and black waist pleats
 
 
All this time, I thought these were vertical darts. The line drawings appear to show pleats, but if you're not looking carefully, they're easy to miss. 

Since I made shoulder princess seams, the front pleats and seam line were too close and it made for awkward sewing. Plus I didn't like how the pleats "poked out" at the waist; it's a weird look.

 
 
 The back pleats were fine - although still creating a bit of fullness.



Issue #3: front waist seam and band
 
 
In both views, the front button band is cut-on. That is, the band is folded twice and stitched down. This is all good if there isn't a seam breaking up the band.  Remember:  the bodice and skirt are constructed separately and then joined at the waist. About three inches of the band on the bodice and skirt are left un-sewn until after the side seams are sewn. Doing it this way, I found it nearly impossible to make the waist line even.


 
In the future, I will make a separate front band that is attached after the bodice and skirt are joined. This way, hopefully any unevenness won't be as noticeable.
 
 
I can hide the wonkiness with the belt. I've yet to wear the dress, so I don't know how well it will hold up.

Final Thoughts
Despite the many attempts and a few problems with construction, I like my dress. The fabric is stretch cotton sateen from Mood and the buttons are vintage from the stash. I'll wear it for sure, but I won't try 8014 again. Some patterns don't work and that's fine. Since making this dress, I've tried two other dress patterns that fit much better with less hassle. I'll share details soon.



Question:  Have you tried this pattern? If so, what was your experience?
 
Thanks for reading!

L

LinkWithin

Related Posts Plugin for WordPress, Blogger...