27 March 2013

Jeans #9 (Part 2 - back pockets)

The instructions for J2908 are nicely divided into sections that feature the part of the jeans being made:  back pockets, back, front pockets, fly, side seams, belt loops, and waistband.  As I continue to document the process, I will follow this progression of construction and blog about each part separately.

Back Pockets (1 hour, 31 minutes)

Designing the back pockets of jeans is the most time consuming part of the process for me.  I spend a lot of time scouring the internet for images that I think are cool and easy replicate.  I've got some ideas about future pairs of jeans that may involve embroidery, hot-fix crystals, eyelets, and applique - not all at the same time!  Here, I only counted the time it took to physically draw the design, transfer it to the pockets, and sew.

1.  I made a copy of the back pattern piece and added seamlines (3/8").  




I also cut out a piece of transfer paper in the same shape of the pocket. This made it easier for me to ensure everything was lined up properly.

2.  Next, I free-handed a design onto the blank copy of the pocket and traced it with a serrated tracing wheel.



As you can see, I only traced one set of lines.  I used the guide on my presser foot to stitch the other lines. 

 3.  The fabulous Lisa of Sew On and Sew On posted a tutorial on how she preps and sews her back pockets.  I do mine a little bit differently.  Instead of stitching on the seamlines, I serge all of the edges and use this as my guideline.  The seam allowances on this pattern are 3/8" and while my serging is a bit more narrow than that, I don't have a problem folding over the necessary amount.  I also don't interface the top part of the pocket.  I haven't had a problem with the pockets stretching out, though this is something I will probably start doing on future pairs.




I didn't backstitch at the beginning or end of any line of sewing.  I know...I know...the horror!  I figure these edges are going to get turned under, pressed, and topstitched.  I think the stitches are pretty safe. =)

4.  Next I fold under 3/8" and press.  I am very generous with steam here because I want everything to stay nice and flat.  I also trimmed all of the loose threads.  Pin the pocket to the back at the marked dots.



5.  Whenever I topstitch, I use both a regular zigzag foot as well as a blindhem foot.  The blindhem foot has a little flange on the bottom that can be used as a guide along the edge of the fabric.  I sew the first line of topstitching with this foot and use the zigzag foot to sew the second line. 



To keep from having to change the foot often, I sewed the first line of topstitching for both pockets, then sewed the second line using the other foot.


6. I rarely put anything in my back pockets, but I still like to have a bit of security at the corners since they are points of stress.  To secure this area, I topstitch a little square through all layers.



7.  Finally I press both pockets with lots of steam to set the stitches.
 



That's as far as I've gotten with the jeans.  I still need to finish my Vogue skirt and whip up something for Faye's Top Sew Along.  Y'all know Faye hosts the best sew alongs, right?!

Time recap:

prep - 33 minutes
back pockets - 91 minutes

Total time:  2 hours, 4 minutes

Until next time, peace!

L

24 March 2013

Jeans #9 (Part 1 - prep)

That's eight pairs of Jalie 2908.  Eight.  What can I say?  I love making and wearing jeans.  

Currently, I only wear five of the eight because one pair stretched out so much that I can take them off without unzipping or unbuttoning.  The other two are too small because...well...chocolate happens.

So I'm working on #9.  This time around, I've decided to carefully document the time it takes to make one pair and photo the process as I go along.  Oftentimes people ask me how long it takes to make them and I never have an answer.  A few hours?  A few days?

Prepping the Fabric (time not counted)

I always wash and dry my denim three times before I cut.  I learned to do this after my first pair shrunk considerably after I made them.   I like the hem of my jeans/pants to touch the top of my shoes.  This pair shows way too much shoe.  


I don't add any fabric softener or conditioners to the water.  After the third drying session, I immediately remove the fabric from the dryer and iron out all of the wrinkles.  I've found that leaving the fabric in the dryer causes some (most?) of the wrinkles to set.

I didn't time this part because I washed and dried over a couple of weeks.  I try to combine loads as much as possible so I only handled the denim when I had something to wash.

Cutting Out the Pieces/Prepping Machines (33 minutes)

Since I've made this pattern so many times already, cutting out didn't take much time.  The pieces are already prepared and altered to fit.  I still have to cut out the pocket lining and interfacing.  I'll add this in a separate section.

To sew jeans (or anything with topstitching), I set up three machines.  I usually sew the seams first, serge them together, press the seam to one side, then add a double row of topstitching. 

older picture of machine set-up for jeans sewing

That's all I have for now.  I started designing the back pockets and will share those details in the next post.   Currently I'm working on my last UFO (Vogue 8426) which I'm making in denim and including lots of topstitching.  I hope to finish that soon, but I think I'm getting sick so we'll see how that goes.

Until next time, peace!

L


LinkWithin

Related Posts Plugin for WordPress, Blogger...