03 June 2015

Jalie 2919 (cardigan): complete


Because I wasn't happy with my first cardigan, I searched for a suitable replacement.  First I traced the Jalie Cocoon cardi, but didn't have enough fabric.  Then I traced the Jalie Drop Pocket cardi, but decided against it for a reason that I cannot remember.

Finally I settled on the Jalie (I detect a theme) Pleated cardigan and couldn't be happier!  I owe a lot of my squeeeeeee to the fabric as it has the *perfect* drape for this pattern.

Fabric & Notions:
  • 2.5 yards of medium-heavy cotton knit
  • strips of muslin selvedge to stabilize the shoulder seams
  • 80/12 stretch needle for seams; serger to finish seams together

Size & Fit/Alterations:  I used a straight size Z (according to my full bust measurement) and no FBA.  This is my size for bodices using Jalie patterns.  The only drawback is that the shoulder seams are usually too long, which is an easy fix.

Either I have freakishly short arms, or Jalie drafts for people with freakishly long arms.  I removed 2" from the sleeves and could probably remove another inch or two.  In their defense, the knit I used has really awesome drape and pulls everything down.

I also removed three inches in the bodice length.  

The Fabric:  I bought this fabric from that fabric store which shall not be named and immediately questioned my purchase.  The content was supposed to be 90-something % cotton and the rest Lycra, but it was shiny and felt synthetic.  When I did a burn test, it proved to be pure cotton.  Hmm. 

I'm glad I kept it because it proved to work perfectly with this pattern.  I have another piece in gray that I will probably use to make a second version.

Construction:  I sewed the seams on my machine first and then serged them together.  I used a 3.0 straight stitch for both the seams and the tucks.  The stitches appeared to 'get lost' in the fabric; lengthening the stitch solved this problem.

Conclusion:  Love!  

***
This is another garment in my Starting from Scratch wardrobe-building plan.  Here's my progress so far:


Step 1:  nice pair of pants 

I made Kwik Sew 2960 in black rayon-poly-Lycra.

Step 2:  shoes

I have a pair of black semi-comfortable loafers.  I can get about four hours of wear out of them before I have a fit.  Needless to say, I need a better option.

Step 3:  cardigan and tee 

The cardigan is done; I still need the tee shirt.  I had two major failures in this part.  Who would have thought fitting a tee shirt could be so difficult?

Step 4:  jeans and a shirt 

Jeans were made in April and blogged here.  I'm dragging my feet on making the white button-down shirt because...it's white.  I haven't figured out what to use to mark the fabric. Plus, my serger is covered in dark-colored lint and fuzz.  Gotta clean that first before I sew anything white.

Step 5:  accessories round 1 

I have scarves with my colors:  teal, yellow, white, black.  I also have an Olivia Pope-inspired black purse.  I'll fill in more accessories later in process.

Step 6:  accent color tops and scarf

I made a dark teal button-down shirt back in January.  I will raid the stash to see if I have anything in yellow; I'm sure I do.

Step 7:  base in the second neutral
 
In this step, we are to include a pair pants, cardigan, and shoes in the second neutral.  I made two versions of Kwik Sew 2960 in solid dark grey and dark grey herringbone and have a pair of grey flats.  I still need the cardigan.

***

That's it!  There is a point in the steps where all of the possible combinations are pictured.  Once I've completed the missing items, I'll create a collage and post an update.  

More information on Starting from Scratch can be found here:  The Vivienne Files.  NAYY - just a fan of her wardrobe plans.

Until next time, peace!

27 May 2015

Simplicity 2284 (jacket): Complete



I just haven't taken the time to get photos of me wearing it or the other things I made recently.  I will eventually.

Fabric & Notions
  • little more than 1.5 yards of wool tweed-like fabric
  • 1.5 yards of black ambiance lining
  • 20-inch metal separating zipper
  • six metal buttons
  • fusible interfacing
  • muslin scrap for back stay
  • bias-cut fleece strips for sleeve heads
  • 80/12 universal needle (shell); 70/10 microtex needle (lining)
  • sewing machine and serger

Size & Fit/Alterations:  I've had really good experience with Simplicity's multi-cup patterns.  I recently tried to sew the very popular Butterick 5678 dress shirt pattern and it was a huge fail.  Though I used the D-cup pattern piece, it was still too tight, then too loose, then too tight again.  I mean, way to play with my emotions.  

Simplicity's multi-cup patterns, on the other hand, seem to agree with my curves much better.  I started with a size 16 D cup and made the following minor adjustments:
  • lowered bust fullness 1 inch on the front and side front panels
  • 1 inch sway back adjustment
  • shortened the sleeves 1.5 inches between the notches

That's it!  I can zip the entire jacket up to my neck and there is ZERO pulling.  I would never wear it completely zipped, but the fact that I can makes me do a happy-dance.

The only thing is the neckline is a little wide when zipped.  The front stands away from my neck, but since I'll never wear it zipped, it's not a big deal. 

Zipper Length:  One note about choosing a zipper.  The envelope suggests an 18-inch zipper for all cup sizes.  This is ridiculous since each cup size increases the length of the seam over the bust.  Fortunately, the only zipper Joann had at the time was a 20-inch zipper and it turned out to be the perfect length.  So if you make this jacket and need a larger cup size, make sure to increase the length of the zipper.

Construction:  Sewing the jacket was pretty straight forward.  My only worry was the vented sleeve with mitred corners.  Since I never did anything like that before, I was nervous.  Hah.  I channeled my inner crafty chemist and just went for it.

I wish I took pictures.  The mitred corners were PERFECT.  My button sewing?  Not so much.  Meh, that's how it goes.
I added my usual light-tailoring techniques:  fused interfacing to whole front, added back stay, and sleeve heads.  I should have interfaced the hems, but I didn't.  They're not as crisp as they can be.  I'll do it next time.

Instructions:  The instructions were fairly straightforward.  If you're sewing the zippered-front version and have attached the lining, skip the foolishness that is this step:

Leave an opening in the jacket hem to turn right side out.  Slipstitch opening.

With other jacket patterns, this (or some variation) makes total sense.  But in this view, the center front and front facing are sewn last with the zipper which leaves a big ass gaping hole for you to turn the jacket right side out.  So much NO. 


Conclusion:  Despite how long it took me to finish the jacket, I enjoyed sewing it and definitely plan to make it again.  It can be worn with jeans or a skirt and I kinda like not having a collar.


In this weirdly tiny photo, the jacket is shown with McCall's 6078 (knit cowl neck top) and New Look 6809 (OOP skirt).

***

These pieces are part of my what-appears-to-be-a-year-long Starting from Scratch wardrobe-building project.  I've made several pieces for the project and will post an update with the completed pieces soon.  I need to make a black tee shirt and that's proving to be way harder than I expected.

Until next time, peace!

L



LinkWithin

Related Posts Plugin for WordPress, Blogger...